Installing Deck Stairs

If the stair rises are not of the same height then it will look tripping hazard. Measure the length of the total run from your decks platform and mark the part of the platform where you plan to install the steps using a piece of chalk.

Building Deck Stairs

The stairs leading up to the first level of this deck need to climb an overall distance of 38 in.

Installing deck stairs. Cut similar pieces that will serve as the lower railings and baluster supports. Lay out the stairs. 2 Use 4-foot level and tape measure to find the total rise of the staircase.

Now lay the first 2-by-4 on the flat top of the third and fasten it. Leave less than a 6 gap between steps and this lower railing. If your first tread steps down from the deck you must extend the rim joist to create a solid surface below the deck rim to attach it to.

By Mike Guertin Issue 248 - DecJan 2015. Installing Railings Deck Stairs Custom Details Finishes Repairs and Maintenance Complete Deck Builds How-To Mounting Deck Stairs Dedicated footings and the right hardware make a secure stringer attachment. Fit and fasten the stringers to the deck.

Fasten the third 2-by-4 to the posts with railing brackets. Widea comfortable distance for two people using the stairs to pass side by side. Stair Railing and Balusters DIY Deck Stairs Handrails Measure up the posts to the railing height minus 1 12 inches and mark the posts.

That calls for five steps overall each with just over a 7-12-in. Fasten the treads to the stringers. Use positive connections to install stair stringers using stair stringer connectors to the front face of the rim to provide adequate support.

We install pressure treated railing and spindles on a wooden deck. Start by determining where youll attach your new steps and mark the location where youll install your stair risers also known as stair stringers. 1 Determine the width of each stair tread.

Next measure the distance from the ground to the top of your deck known as the vertical drop. Install these railings between the posts making sure they are parallel to the upper railings. In this video This Old House general contractor Tom Silva explains how to build deck stairs.

First you need to think about the style and type of deck stairs. Dig out soil and level the area for placing your 3-foot by 3-foot landing area. The steps are few.

Install your pavers or patio squares to produce the landing spot. Most deck stairs are cobbled onto the deck as afterthoughts. These types of stairs are trendy these.

Make a line where the bottom level will go so that you know where to set up the footings. Then we finish up with a homemade post cap. Attach the railings to the posts with 3 deck screws making sure the slope matches that of the stairs.

In addition stairs should be at least 4 ft. Deck stairs should be carefully planned. From the pavers to the decking.

3 Divide total rise by number of steps to find height of each riser. Types Of Deck Stairs. Risean ideal step up.

Pre-fab stringers make installing deck stairs an easy-to-moderate DIY project. Make sure you leave at least 36 inches between stringers to allow for enough stair width. So follow these steps and build your deck stairs without messing up the things.

We also layout and install stairs.

How To Install And Build Strong Stair Stringers Fine Homebuilding