How To Install A Gfci Outlet

GFCI outlets are easy to install as they come pre-wired. Replace the cover plate then check to make sure the GFCI is operating properly.

Wiring Multiple Gfci Outlets

If replacing an existing GFCI label the black and white wires on the Line and Load terminals.

How to install a gfci outlet. GFCI outlets are pre-wired with two sets of wires marked Line and Load The line wire functions similar to the hot wire and supplies incoming power. Use the new pigtails to terminate on the screws of the new GFCI outlet. Separate the wires from the box into two pairs.

Verify the Load and Line terminals while installing a GFCI for protection. Test the downstream outlet by plugging in the GFCI tester and pressing the test button. Load wires on the GFCI also provide short-circuit and shock protection to those.

Remove mounting screws and gently pull the switch out of the wall box. The other set will be the load which carries power to additional outlets on the same circuit. Use the correct polarity ie.

They have two sets of wires. Install the new ground-fault circuit interrupter outlet by attaching both the black and white wires to the line side of the outlet. Use the suitable voltage and ampere rating of switch with appropriate wire size and proper size MCB according to the load rating.

In other words connect the wires to the correct side of outlet for proper operation. A GFCI outlet properly installed will protect all the outlets on the load. Press the reset button on the GFCI to reenergize the outlet.

This video will s. More DIY Home Improvement Projects. Current building codes require installation of GFCI outlets when outlets are installed near a water source like in bathrooms or kitchens.

But if there is sufficient space splice all the black wires together with a wire nut including a 6 piece of additional wire. Connect the bare wire to the grounding screw. Attach the GFCI-protected outlet label to downstream outlets.

Press the test button. The load wire distributes power to additional outlets installed on the same circuit. GFCI outlets are larger than normal ones and the space is limited.

The outlet should go dead. Connect the white wire of the load side of the receptacle to the load terminal of the GFCI having silver color and black wire to the hot load terminal of the GFCI. Disconnect the wires from the outlet.

Now identify the ground wires in the outlet and connect them to the screw of GFCI which is green in color and has a. One set of wires will be the line or power supply. The lights on the tester should go out.

Do the same with the white wires and the ground wires. Disconnect wires from the existing outlet. One set is called load while the other one is called line.

Use a screwdriver or drill to remove the wall plate. The load set of ire distributes power to additional outlets installed after it on the same circuit while the line set of wire acts as a hot wire.

Dead Gfci Outlet S Wire Is Live Home Improvement Stack Exchange